Smart Home Security

Setting Up Your Control Panel

Before setting up your AAA Smart Home control panel, make sure you have all the components needed and you have read over the documentation.

Table mount (recommended)

Wall mount

Quickstart Guide PDF

Control Panel User Guide PDF

Installation Parts

  • Your touch-screen control panel
  • Power supply plug, already wired into the back of the panel
  • Outlet power adaptor
  • Retainer bracket
  • Outlet screw
  • Plastic wire tie
  • Attachable table stand for placing your panel
Parts on table

Choose your location

The easiest way to mount your panel is using the table stand to rest it on a table, countertop, or shelf.

Choose a location that’s close to an outlet and easily accessible for controlling or disarming.

Panel on table

However, avoid putting your panel in high-traffic areas of the home, near a sink or electric appliances, or any place where it can be knocked over or damaged.

Note: The panel can also be mounted to a wall.

However, we highly recommend using the table stand, since a wall install may require additional work and equipment, including drilling and running wiring, that is best done by a technician.

If you prefer a wall mount for your panel, please call our Smart Home Pros for support before attempting this install. You can also watch the instructional wall install video above.

Installation instructions for your table mount

1. Carefully remove the existing screw from your chosen outlet cover. The screw will be on the bottom or the middle of the cover, depending on your outlet.

Removing outlet cover

2. Take your power adaptor, and remove the green sticky tape cover from the back of the retainer bracket.

Peeling green sticky tape

3. Plug your power adaptor into your outlet. Secure by inserting the long screw provided into the open outlet hole.

Plugging in adapter

4. Use your wire tie to hold the power adaptor in place. You can clip off any excess wire afterward.

Wire tie on adapter

5. Attach your table stand into the back when you're ready to place your panel.

Attaching table stand

6. Take your panel, and push and hold the standby button on the side for 3 seconds to power it up.

Pushing standby button
Installing Your Lamp PlugYour Lamp Plug lets you turn a lamp on and off, or dim it (if the lamp has a dimming bulb), using your control panel or mobile app. It plugs into any standard outlet.
Installing Your Lamp Plug
Installing Your Panic ButtonWhen pressed within range of your panel, the panic button alerts your system to dispatch medical, fire, or police first responders in case of an emergency.
Installing Your Panic Button
Installing Your Entry SensorsEntry sensors help protect your home's main entry points by alerting you when a door or window are open
Installing Your Entry Sensors
Installing Your Carbon Monoxide DetectorYour carbon detector alerts you to the presence of carbon monoxide in your home.
Installing Your Carbon Monoxide Detector
Installing Your Smart Door Lock With LeverYour keyless Smart Door Lock with a lever lets you conveniently unlock and lock your door with a backlit touchscreen keypad, rather than having to carry around keys that can get lost.
Installing Your Smart Door Lock With Lever